Login or Register for FREE!
Subelement B

MF-HF-DSC-SITOR (NBDP) Equip. & Ops:

Section 21

SITOR (NBDP)-FEC:

If a vessel is within range of NAVTEX broadcasts and both the Inmarsat-C and the NAVTEX receiver are inoperative the GMDSS operator should:

  • Correct Answer
    Select 518 kHz FEC TELEX on the MF/HF console to receive MSI.
  • Select 518 kHz ARQ TELEX on the MF/HF console to receive MSI.
  • Request repairs of the Sat-C system and wait until within range of NAVTEX.
  • Select an HF MSI frequency and ARQ TELEX mode to receive MSI.
This question does not yet have an explanation! Register to add one

Tags: none

The sequence ARQ, FEC, SFEC best corresponds to which of the following sequences?

  • One-way communications to a single station, one-way communications to all stations, two-way communications.
  • Correct Answer
    Two way communications, one-way communications to all stations, one-way communications to a single station.
  • One-way communications to all stations, two-way communications, one-way communications to a single station.
  • Two way communications, One way communications to a single station, One way communications to all stations.
This question does not yet have an explanation! Register to add one

Tags: none

Selective FEC communications (SFEC) are employed when:

  • Multiple stations without a group SELCALL must receive communications without using their transmitters.
  • Multiple stations must receive communications by using their transmitters to achieve phasing.
  • Correct Answer
    An individual station must receive communications without transmitting (Radio Silence).
  • An individual station must receive communications by using their transmitter to achieve phasing and block other stations from breaking in.
This question does not yet have an explanation! Register to add one

Tags: none

Which of the following is true of SITOR (NBDP) Mode B (FEC), in the presence of static crashes.

  • Data flow rate depends on signal propagation.
  • Idle characters are sent upon request.
  • Transmitter and receiver cannot synchronize.
  • Correct Answer
    FEC reduces the error rate by transmitting each character twice.
This question does not yet have an explanation! Register to add one

Tags: none

If the vessel is beyond range of NAVTEX broadcasts and the Sat-C system fails, the GMDSS operator must:

  • Correct Answer
    Select an HF MSI frequency and FEC TELEX mode to receive MSI.
  • Select 518 kHz ARQ TELEX on the MF/HF console to receive MSI.
  • Request repairs of the Sat-C system and wait until within range of NAVTEX.
  • Select 518 kHz FEC TELEX on the MF/HF console to receive MSI.
This question does not yet have an explanation! Register to add one

Tags: none

If the vessel is experiencing atmospheric interference with NAVTEX broadcasts, especially in the tropics, the GMDSS operator should:

  • Select one of the 6 HF MSI frequencies and set-up the transceiver in ARQ TELEX mode.
  • Correct Answer
    Select one of the 8 HF MSI frequencies and set-up the transceiver in FEC TELEX mode.
  • Select one of the 6 MF MSI frequencies and set-up the transceiver in FEC TELEX mode.
  • Select the MF MSI frequency dedicated to tropical MSI and set-up the transceiver in FEC TELEX mode.
This question does not yet have an explanation! Register to add one

Tags: none

Go to 20 Go to 22