Login or Register for FREE!
Subelement E9

ANTENNAS AND TRANSMISSION LINES

Section E9G

The Smith chart

Which of the following can be calculated using a Smith chart?

  • Correct Answer
    Impedance along transmission lines
  • Radiation resistance
  • Antenna radiation pattern
  • Radio propagation

The Smith chart, invented by Phillip H. Smith (1905-1987),[1][2] is a graphical aid or nomogram designed for electrical and electronics engineers specializing in radio frequency (RF) engineering to assist in solving problems with transmission lines and matching circuits.

  1. ^ Smith, P. H.; Transmission Line Calculator; Electronics, Vol. 12, No. 1, pp 29-31, January 1939
  2. ^ Smith, P. H.; An Improved Transmission Line Calculator; Electronics, Vol. 17, No. 1, p 130, January 1944

Last edited by verticalham. Register to edit

Tags: none

What type of coordinate system is used in a Smith chart?

  • Voltage circles and current arcs
  • Correct Answer
    Resistance circles and reactance arcs
  • Voltage chords and current chords
  • Resistance lines and reactance chords

Smith charts have to do with Impedance matching (Resistance). The coordinate system used is resistance circles, and curves.

See: https://en.wikipedia.org/wiki/Smith_chart

Last edited by traveller_nl. Register to edit

Tags: none

Which of the following is often determined using a Smith chart?

  • Beam headings and radiation patterns
  • Satellite azimuth and elevation bearings
  • Correct Answer
    Impedance and SWR values in transmission lines
  • Point-to-point propagation reliability as a function of frequency

A Smith chart is a graphical chart which shows the impedance and SWR values of an antenna system across a range of frequencies. Because it shows both SWR and Impedance it makes it easier to know what to adjust while designing antenna systems.

To learn more just search the web -- it's a complex topic but there are lots of articles!

Transmission lines, and matching circuits have all to do about matching impedence (resistance).

Memory aids from other users:

  • Smith & Wesson Rules! TranSMITHion

Last edited by kd7bbc. Register to edit

Tags: none

What are the two families of circles and arcs that make up a Smith chart?

  • Inductance and capacitance
  • Reactance and voltage
  • Correct Answer
    Resistance and reactance
  • Voltage and impedance

remember: smith chart uses R & R, resistance and reactance. Also remember complex impedance is \(R + jX\) with R being resistance and X being reactance.

See wikipedia article for more information

Last edited by kv0a. Register to edit

Tags: none

Which of the following is a common use for a Smith chart?

  • Correct Answer
    Determine the length and position of an impedance matching stub
  • Determine the impedance of a transmission line, given the physical dimensions
  • Determine the gain of an antenna given the physical and electrical parameters
  • Determine the loss/100 feet of a transmission line, given the velocity factor and conductor materials

The Smith Chart is a tool for representing complex impedances in polar coordinates. It is used for designing feedlines, filters, antennas etc.

Nevertheless, this question is a candidate for a memory item.

SillyHint: 'Smith' was one of the SnowWhite's stubby dwarves

Last edited by kmgflavin. Register to edit

Tags: none

On the Smith chart shown in Figure E9-3, what is the name for the large outer circle on which the reactance arcs terminate?

  • Prime axis
  • Correct Answer
    Reactance axis
  • Impedance axis
  • Polar axis

The key word here is "REACTANCE".

Reactance arcs terminate at the "REACTANCE" axis!

Last edited by kd5isa. Register to edit

Tags: none

On the Smith chart shown in Figure E9-3, what is the only straight line shown?

  • The reactance axis
  • The current axis
  • The voltage axis
  • Correct Answer
    The resistance axis

The straight line (the ONLY straight line) in a Smith Chart is the resistance axis.

Last edited by sapient-prickly-0y. Register to edit

Tags: none

How is a Smith chart normalized?

  • Reassign the reactance axis with resistance values
  • Reassign the resistance axis with reactance values
  • Correct Answer
    Reassign the prime center’s impedance value
  • Reassign the prime center to the reactance axis

The Smith chart is plotted on the complex reflection coefficient plane in two dimensions and is scaled in normalised impedance (the most common), normalised admittance or both, using different colours to distinguish between them. These are often known as the Z, Y and YZ Smith charts respectively.[7] Normalised scaling allows the Smith chart to be used for problems involving any characteristic or system impedance which is represented by the center point of the chart. The most commonly used normalization impedance is 50 ohms. Once an answer is obtained through the graphical constructions described below, it is straightforward to convert between normalised impedance (or normalised admittance) and the corresponding unnormalized value by multiplying by the characteristic impedance (admittance). Reflection coefficients can be read directly from the chart as they are unit-less parameters. Wikipedia.org https://en.wikipedia.org/wiki/Smith_chart

Prime

Last edited by n1nxd. Register to edit

Tags: none

What third family of circles is often added to a Smith chart during the process of designing impedance matching networks?

  • Correct Answer
    Constant-SWR circles
  • Transmission line length circles
  • Coaxial-length circles
  • Radiation-pattern circles

The circles already present on the Smith chart include those for the resistive and reactive components of the normalized load impedance. One would normally use the intersection of these circles to identify the magnitude and angle of \(\Gamma\), the voltage reflection coefficient.

By maintaining a \(\Gamma\) of constant magnitude about the origin, one can draw a third group of circles. Because standing wave ratio only depends on this magnitude, these circles define the standing wave ratio.

Thus, the correct answer is standing-wave ratio circles.

https://youtu.be/36j6RyeWdN0

Last edited by ironcal67. Register to edit

Tags: none

What do the arcs on a Smith chart represent?

  • Frequency
  • SWR
  • Points with constant resistance
  • Correct Answer
    Points with constant reactance

In the days of slide rules, the Smith chart was packed with lines, curves, grids and nomographs.

In the ARRL Extra class manual a Smith chart is introduced as an XY-coordinate graph where the top and bottom of the Y axis is bent to the right to touch the X axis at the infinite resistance point. These are the constant resistance circles. THESE ARE NOT the arcs the test is asking about.

The "arcs" are the lines that intersect the bent Y-axis lines, coming from the infinite resistance point out to the edge of the circle. These arcs represent points with constant reactance.

To interpret impedance on the Smith chart, it is necessary to understand constant resistance circles and constant reactance arcs.

A very comprehensive and in-depth depiction of Smith Charts can be found at Wikipedia

Last edited by marvsherman419. Register to edit

Tags: none

In what units are the wavelength scales on a Smith chart calibrated?

  • In fractions of transmission line electrical frequency
  • Correct Answer
    In fractions of transmission line electrical wavelength
  • In fractions of antenna electrical wavelength
  • In fractions of antenna electrical frequency

The wavelength scales on a Smith chart are calibrated in fractions of transmission line electrical wavelength.


The outer ring of a Smith Chart defines fractional electrical wavelength of feedline starting at zero and ending at 0.5 (half the electrical wavelength). It also defines the direction toward the generator. This is a hint, indicating that this is a feedline length and not antenna length.

Smith Charts are useful to determine feedline line length required to match a load to a radio transmitter.

Hint: 'flew' Fractions of transmission Line Electrical Wavelength

https://www.microwaves101.com/encyclopedias/smith-chart-basics

Last edited by comdijital. Register to edit

Tags: none

Go to E9F Go to E9H