Login or Register for FREE!
Login or Register for FREE!
Subel. G
6 questions
Subelement G
VHF-DSC Equipment & Comms:
Section 44
VHF: Power and Range:
Which of the following control selections may result in limited receiving range?
  • Setting the squelch control to its minimum level.
  • Correct Answer
    Setting the squelch control to its maximum level.
  • The power switch is set to the "high" output position, resulting in receiver overloading.
  • Setting the channel selection switch midway between channels 6 and 16.
This question does not yet have an explanation! Register to add one

Tags: none

While conducting routine communications using the wheelhouse VHF with a station 1 mile distant, your recommended power setting would be:
  • 25 watts after dark.
  • 25 watts during a clear sunny day.
  • Correct Answer
    1 watt, day or night.
  • 1 watt using DSC at night.
This question does not yet have an explanation! Register to add one

Tags: none

Which of the following factors does not normally affect the range of VHF transmissions?
  • Salt water ingress into the antenna coaxial cable.
  • Power level setting.
  • Vessel antenna height.
  • Correct Answer
    Ionospheric refraction.
This question does not yet have an explanation! Register to add one

Tags: none

Much longer than normal VHF transmissions are typically caused by:
  • Correct Answer
    Atmospheric ducting or tropospheric propagation.
  • Changing power from 1W to 25 W.
  • Skywave reflections from the D layer.
  • Ionospheric activity in layers F1/F2.
This question does not yet have an explanation! Register to add one

Tags: none

Describing VHF transmissions as "line of sight" does not mean:
  • Vessel antenna height will not affect the radius of propagation.
  • The normal transmission range to a coast station is approximately is 10 NM.
  • Coast station antenna height has no effect on the radius of transmission.
  • Correct Answer
    VHF communications are effective only with nearby stations within visual range of the bridge.
This question does not yet have an explanation! Register to add one

Tags: none

The effectiveness of VHF communications is maximized by:
  • Correct Answer
    Appropriate setting of the transmitter power, selecting an appropriate channel & adjustment of squelch for maximum receiver sensitivity.
  • The adjustment of squelch for maximum receiver sensitivity, setting transmitter power to 1W & selecting an appropriate channel.
  • Selecting an appropriate channel, adjustment of squelch for minimum receiver sensitivity & setting transmitter power to 1W.
  • Selecting an appropriate channel, adjustment of squelch for minimum receiver sensitivity, setting transmitter power to 25W.
This question does not yet have an explanation! Register to add one

Tags: none

Go to 43 Go to 45
HamStudy.org™ is copyright 2024 Signal Stuff™, All rights reserved.
View Privacy Policy    |    Get help with HamStudy.org™